Specifications

101
Southwestern Industries, Inc.
TRAK LPM Programming, Safety, & Operating Manual
parts, you can save 8 pictures per program and 8 additional pictures within the master
program for a total of 40 pictures.
NEXT allows you to view the next picture that is attached to a given part. Pressing this
button allows you to toggle between each picture.
Note: Once you add pictures, you must resave the program in the Program In/Out Mode
for the pictures to be saved. The pictures for each program will be saved within a folder
called PICTURES and then within a folder that is given the same name as your program.
This will all be saved in the directory that you save your program. The ProtoTRAK will
automatically create these folders if they do not exist.
NEXT PROG – This allows you to view the pictures you have saved for each program
within the master program. If you have created a master program with 4 parts, then you
may need to hit this button 4 times to toggle between the pictures for each part and a 5th
time to get back to where you started.
Pictures should be loaded in the ProtoTRAK as JPEG files. It should be noted that the
ProtoTRAK will reduce the resolution of the picture to less than 100 Kb if the picture
size is larger than this. This is done so your pictures do not take up too much drive space.
11.1.2 NOTES