Specifications

131
Southwestern Industries, Inc.
TRAK LPM Programming, Safety, & Operating Manual
14.4 Saving Programs
To save a program file to a storage location, press the SAVE softkey from the Program
In/Out Mode screen.
Find the drive and folder you want to save the program file in using the softkeys as
described above in the section on basic navigation.
The Save Screen
Two additional parts of the screen appear once the SAVE softkey is pressed:
File Name: displays the name of the file that is in current memory.
SAVE AS: lists the formats for which the file may be saved. The default is .PT7.
Three additional softkeys appear:
CREATE FOLDER: Use this to create a new folder for the program file. This new folder
will be added to the list shown in the listing area, at the same level of organization as the
files and folders shown. Once the CREATE FOLDER softkey is pressed, a Data Input
Line will appear for entering the name of the folder. The name "Folder1" will be written
in the box. To accept this name, press SET. You may input a name you select by writing
over this name. Use the same procedure for naming a program (see Section 7.3.1).
SAVE FILE: Saves the program file to the location shown in the Look In area.
RETURN: Returns to the Program In/Out Mode screen.