Specifications

142
Southwestern Industries, Inc.
TRAK LPM Programming, Safety, & Operating Manual
G85
Boring cycle
G85 X0. Y0. Z-1 R.1 F15.
G86
Boring canned cycle with retract
G86 X0. Y0. Z-2. R.1 B35. Q.020
P300 F15.
B = Angle of boring head.
Q = Retract distance, away
from B.
G89
Boring cycle, dwell at bottom
G89 X0. Y0. Z-1 R.1 P800 F15.
P = dwell time in
milliseconds
G90
Absolute Mode
G90
Default
G91
Incremental Mode
G91
G98
Use previous Z position as Rapid
plane
G98
Default
G99
Use R value as Rapid plane.
G99
G110
Select Work Coordinate #7
G110
G111
Select Work Coordinate #8
G111
G112
Select Work Coordinate #9
G112
G113
Select Work Coordinate #10
G113
G114
Select Work Coordinate #11
G114
G115
Select Work Coordinate #12
G115
14.11.2 M Codes Supported by the ProtoTRAK PMX CNC
M00 program stop (press go to proceed)
M02 end of program (no rewind)
M03 spindle on CW or FWD
M04 spindle on CCW or REV
M05 spindle stop
M06 tool change
M07 air blast ON
M08 flood coolant ON
M09 coolant OFF
M10 4
th
axis Auto clamp ON (default)
M11 4
th
axis Auto clamp OFF
M21 Indexer – pulse ON
M22 rapid to part change position
M30 end program (rewind stop)
M38 air blast OFF
All other M codes will be ignored.
Notes:
1. Place M Codes on same line as movement G Code.
2. One M Code per block.
3. All values are in Absolute, except for I, J, and K values for arcs.
4. The AUX button is used to turn coolant on and off based on the spindle being on and
off. When the spindle is on, the coolant is on.