Specifications

Southwestern Industries, Inc.

TRAK LPM Programming, Safety, & Operating Manual

When the Program name prompt is highlighted, the Data Input Line will show "Program

Name:"

At this point you may:

 Press number keys.

 Press Help to access alpha keys and special characters in the ProtoTRAK PMX CNC.

 Use a keyboard plugged into the ProtoTRAK PMX CNC to name the program.

Pressing the Help hard key when the Program Name is highlighted calls up alpha keys.

Program name input without a keyboard.

To use the alpha keys and special characters on the ProtoTRAK PMX CNC:

 Use the CLEAR softkey to erase the entire line; the BACKSPACE softkey to erase

the last character or number.

 Use the arrow softkeys to move around the table.

 Once the character you want is highlighted, use the ENTER softkey to load the

character into the program name.

 Use the blank space on the lower right of the table to insert a space into the program

name.

 Once you finish entering the letters and special characters, press the END softkey.

This tells the ProtoTRAK PMX CNC that you are finished with the alpha table.

Numbers may still be added to the program name.