Specifications

78
Southwestern Industries, Inc.
TRAK LPM Programming, Safety, & Operating Manual
b. Surfacing type programs that are comprised of small moves that have small
angles between the moves should not require a G64 or corner blending to be
turned on to avoid hesitation.
c. All moves that are tangent to each other also will not have exact stop (G61)
apply. Please note that when making a 90° outside corner with tool
compensation applied, we generate an arc to machine the sharp corner so
these moves are tangent.
d. For all moves where exact stop will apply, the user may notice a slight
hesitation on these moves. This is due to the control getting into exact
position before performing the next move.