Specifications

80
Southwestern Industries, Inc.
TRAK LPM Programming, Safety, & Operating Manual
Once the profile header screen is finished, you choose between an A.G.E. Mill and an
A.G.E. Arc to define the shape.
Where:
A.G.E. MILL: A straight line from one X Y point to another.
A.G.E. ARC: Any part of a circle.
END A.G.E.: Ends the A.G.E. programming for the Irregular Pocket or Irregular Profile.
ABORT A.G.E.: Aborts all A.G.E. events. The data for all the events is lost.
9.2 A.G.E. Mill Prompts
Press the A.G.E. Mill key.
A.G.E. Mill prompts. Enter what you know, skip or guess the ones you don’t.
Prompts in A.G.E. Mill programming:
TANGENT: this refers to the tangency of the mill to the previous event. See Section
9.11 for a discussion of tangency.
X END: is the X dimension to the end of the mill cut; incremental is X Begin
Y END: is the Y dimension to the end of the mill cut; incremental is Y Begin
CONRAD: is the dimension of a tangential radius to the next event
ANGLE END: is the angle measured counterclockwise from this mill event to the next.
Do not input if the next event is an arc
LENGTH: is the length of the mill from beginning to end