Specifications

91
Southwestern Industries, Inc.
TRAK LPM Programming, Safety, & Operating Manual
Type the new Z Feed and then SET to change all the highlighted values from 50 to 40.
In this example, the Z feed is changed from 50 to 40 for all the Mill Events.
10.3 Erase Program
Use the ERASE PROG soft key to erase the program from the current memory. Erasing
the program from current memory will not affect any programs that are stored.
If you have made changes to the program and wish to save this modified program, you
will need to store it. See Section 14.4
10.4 Clipboard
The Clipboard feature is a way to copy events in one program in order to put them into a
different program. It is a two-part process that takes place in two different Modes. First,
in the Edit Mode, the desired events are copied, or placed on the Clipboard, from the
source program. Then the events are inserted into the destination program in the Program
Mode.
When you press the Clipboard key from the Edit Mode, you start the process that copies
the events that you want to put into a different program than the one in current memory.
Before you do that, you should write a program or open the program file that has the
events you want to copy. This is called the source program.