User`s guide

427-0026-01-10, version 110 Oct 2010 17
4 Caring for your PatrolIR B
4.1 Troubleshooting
If the camera will not produce an image, check the inline fuse and
the fuse panel. If a fuse has blown, determine the cause of the blown
fuse, fix the problem, and replace with a 5 Ampere fuse.
Check the wiring at both the fuse panel and at the termination to the
JCU. Ensure that the contacts are clean dry and free from
corrosion. If maintenance on the wiring connection is required, have
an authorized service representative make the appropriate repairs.
If the camera still will not produce an image, check the video
connection at the camera and at your display. If the connectors
appear to be properly engaged but the camera still does not produce
an image, have an authorized service representative make the
appropriate repairs.
4.2 Replacing the fuses
To replace the fuse, ensure power is off, unscrew the fuse holder,
remove the fuse and replace using a 5 Ampere automotive fuse.
Caution! Do not open the camera body for any reason.
Disassembly of the camera (including removal of the cover) can
cause permanent damage and will void the warranty.
Caution! Replace system fuses with the same value and type
provided at the time of purchase. Using fuse values other than the
ones supplied by FLIR Systems, Inc. may cause permanent
damage to the unit and may void the warranty.