Operation Manual

BG30 4 Basic use and settings
4 Basic use and settings
4.1 Mount the camera
Camera can be mounted on a wall or put down on any suitable
horizontal surface.
1)According to base board installing hole space, make holes on
the wall with a power drill.
2)Fix base board with the host by connecting screw hole.
3)Press “
”button to open the laser pointer for helping
positioning.
4.2 Three camera status
From the basic operations of the camera in previous chapter,
we know that the camera has three basic operation status:
Setting Status: You can change or check camera settings in
this status. You can also But via SMS, you can change or check
settings in any status.
Arm Status: It’s the work status. When there is a motion
trigger, the camera will take photo and send the picture to your
phone or mailbox.
（There are 3 ways the camera will react when it’s triggered:
Only insert TF card: After take photos and it just stores
12