Operation Manual

BG30 4 Basic use and settings
Format Enter
Format the SD-card. All images and
videos in the SD-card will be deleted.
PIR
Interval
1 Minute
0–59 seconds,
1-60 minutes
Choose how long the camera will stop
functioning after each triggering. The
camera’s PIR will be disabled during
this interval.
Photo
Burst
1 Photo 2 -9Photos
Choose the continuous shooting
numbers after each triggering.
Send
Mode
Number Email\Local
Number: Send MMS to preset phone
number; Email: Send picture to
preset email address; Local: Just take
pictures, don’t send out.
Work
Day
All
Sunday\Mond
ay\
Tuesday\Wed
nesday\
Thursday\Fri
day\Saturday
Choose which day the camera works.
Timer
Switch
Off On
The camera will be awoken up at
certain time duration in a day. In the
rest of the time the camera is shut off.
RGB Set Off On R:0-9;G:0-9;B:0-9;
Password Off ON, set
This password is used to lock or
unlock the camera’s control panel.
Default
Set
Restore customer settings to default
values.
Explanation of items:
▼Photo Burst
It means Continuous Capturing Number. This parameter
affects the number of pictures taken for each triggering in Camera
mode. It has nine values: “1 Photo” to “9 Photos”.
▼PIR Interval
This parameter means that how long the PIR (Passive
Infrared motion sensor) will be disabled after each triggering in
ON mode. During this time the PIR of the device will not react to
the motion of human (or animals). The minimum interval is 0
second, it means the PIR works all the time. The maximum
interval is 1 hour, it means the PIR will be disabled for 1 hour after
20