Operation Manual

MG582-8M 4 Advanced Operations
Provided that the date and time are needed to be set to November
15t
item, press UP or DOWN to
e) ll current setting and return to info display.
4.1.7
cts the number of pictures taken for each
trig
ss MENU to display the setting menu.
t.
the option will be
cancel setting and return to info display.
4.1.8
tive and can be adjusted only when the device
in
h, 2010 and 10:30, the steps are as following:
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Set Clock.
c) Press OK to enter into submenu.
d) Press LEFT or RIGHT to select
change the value.
Press OK to save a
Press MENU to cancel setting and return to info display.
Set Photo Burst
This parameter affe
gering in the camera mode. It has three values: “1 Photo” “2 Photos”
and “3 Photos”. Its default value is “1 Photo”. The following shows how
to set photo burst to 3 Photos, provided that the previous option is 1
Photo:
a) Pre
b) Press UP or DOWN to select Photo Burs
c) Press LEFT or RIGHT to select 3 Images.
d) Press OK to save the current setting and
un-highlighted.
Press MENU to
Set Video Length
This parameter is effec
the video mode under ON mode. Its value extends from 1 to 60
seconds with a step of one second. The default value is 10 seconds.
Page 19