Operation Manual

MG582-8M 4 Advanced Operations
Press LEFT and RIGHT to decreases or increases the value by 1
second.
The fo
llowing shows how to set video length to 5 Seconds provided
tha
menu.
th.
to 5 Seconds.
be
cancel setting and exit.
4.1.9
ow to set video sound as off that the previous
op
ENU to display the setting menu.
d.
d the option will be
cancel setting and return to info display.
4.1.10
(Passive Infrared motion
sen
t the previous value is 10 Seconds:
a) Press MENU to display the setting
b) Press UP or DOWN to select Video Leng
c) Press LEFT or RIGHT to decrease or increase
d) Press OK to save the current setting and the option will
un-highlighted.
Press MENU to
Set Video Sound
The following shows h
tion is on:
e) Press M
f) Press UP or DOWN to select Video Soun
g) Press LEFT or RIGHT to select off or on.
h) Press OK to save the current setting an
un-highlighted.
Press MENU to
Set PIR Triggering Interval Time
This parameter indicates how long the PIR
sor) will be disabled after each triggering in ON mode. During this
time the PIR of the device will not react to the motion of human (or
animals). The minimum interval is 0 seconds, it means the PIR works
all the time. The maximum interval is 1 hour. It means the PIR will be
Page 20