Operation Manual

MG582-8M 4 Advanced Operations
The following shows how to set PIR sensitivity as Low provided that
the
setting menu.
l.
and the option will be
cancel setting and return to info display.
4.1.12
defines a certain time lapse in a day when the
Ca
ective when
the
nu.
ch.
enu.
s UP or DOWN to change the
f) OK to save all current setting and the option will be
return to previous menu.
previous option is Normal.
a) Press MENU to display the
b) Press UP or DOWN to select Sense Leve
c) Press LEFT or RIGHT to select Low.
d) Press OK to save the current setting
un-highlighted.
Press MENU to
Set Timer
This parameter
mera can be triggered. The rest of the time the device is shut off. The
effective value for the ranges from 00:00：00 to 23:59:59.
Please note that the start and stop time can only be eff
timer is set as On. Provided that the camera should work from eight
a.m. to five p.m., the steps are as following:
a) Press MENU to display the setting me
b) Press UP or DOWN to select Timer Swit
c) Press RIGHT to select On.
d) Press OK to enter into subm
e) Press RIGHT to select item, pres
value until the start time changes to 8 and the stop time changes
to 17.
Press
un-highlighted.
Press MENU to
Page 22