Operation Manual

MG582-8M 4 Advanced Operations
Press number buttons to key in the digits, letters or punctuations.
Press UP to delete.
Press OK to save all
f) current setting and return to info display.
4.1.17
g is selected as On, after switching on the
cam
ew, old and confirm password,
f) and return to info display. If
nu.
4.1.18
Press MENU to cancel setting and to return to previous menu.
Enter Password
If the password settin
era, the LCD screen on camera will prompt to enter a password.
The default password is 0000. Please key in the password by using the
remote control. It can be changed using the following steps:
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Password.
c) Press LEFT or RIGHT to select On.
d) Press OK to enter into submenu.
e) There are three inputs for key in n
press ﹟ to switch between each inputs. Press number buttons to
key in the digits. Press UP to delete.
Enter OK to save all current setting
the inputs are blank, the password will not be changed; if keyed in
correctly, the new password is set. The LCD screen will prompt to
enter the password next time you switch on the camera.
Press MENU to cancel setting and return to previous me
Reset to Default Settings
To reset the setting to the default values, the steps are as follows:
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Reset.
Page 26