Operation Manual

MG882K-8M 4 Advanced Operations
Page 12
Video Length Choose duration of recording video.
Video Sound Choose if the sound recorder will be used.
PIR Interval
Choose how long the camera will stop functioning
after each triggering. The camera’s PIR will be
disabled during this interval.
PIR Sensitivity
Choose sensitivity of the PIR or off the PIR
detection.
There are four parameters: High, Normal, Low
and PIR Off. The default value is “Normal”. The
higher degree indicates that the camera is more
easily triggered by motion, taking more pictures or
recording more videos. It is recommended to use
high sensitivity degree in a room or environment
with little interference, and to use lower sensitivity
for outdoor or environment with lots of
interference like hot wind, smoke, near
window ,etc. Furthermore, the sensitivity of the
PIR is strongly related to the temperature. Higher
temperature leads to lower sensitivity. Therefore it
is suggested to set a higher sensitivity for high
temperature environment.
Note the PIR can’t be set to off if Time Lapse is off.
Timer Switch
The camera can be set to only record/capture at a
certain time of the day when set to On. The rest of
the time the camera will be shut off and will not