Operation Manual

SG880MK-8mHD/MG882K-8mHD 3 Quick Start Guide
Page 12
3.5 Power on and Enter into the ON Mode
Slide the power switch to the ON position to power on the
camera and enter into the ON mode. Before entering into the
ON mode, you can adjust the camera towards the target
monitoring area by laser pointer.
After switching on the camera, the motion indication LED
(red) light will blink for about 10s. The 10s is a buffering time
before automatically capturing photos or videos, e.g. for closing
and locking the bottom cover, fixing the camera on a tree and
walking away.
The camera has the sound recording function, so the sound
will be embedded in the video clip while capturing a video.
3.6 SMS Control
When the camera is in ON mode, you
can send text message “#T#” to your
camera’s SIM card number to get an on spot
image or use our Android application tools.
Down load the Android control
software (BGTools.zip) from our website.
The specified website is written in the last