Operation Manual

SG560K-8mHD 4 Advanced Operations
Page 12
Please note that if the PIR Sensitivity is set to
Off , then the Timer Interval can’t be set to Off .
Timer Switch
This parameter defines a certain time lapse in
a day when the camera can be triggered, while in
the rest of the time lapse the device is shut off.
The effective value ranges from 00:00 to 23:59.
The default set is Off which means the camera
works all long, Timer switch On means the
camera works only during the time lapse
according to the preset settings.
Flash Range
This parameter means that you can choose the
illumination range. The camera has two options :
8M or 15M.
Time Stamp
This parameter defines whether the date and
time should be stamped on the pictures and
video clips or not.
Default Set
Restore customer settings to default values.
4.2 Default Settings and Live Monitoring
Choose Default Set, all the settings will be changed to the factory
default settings. Please refer to the following table for the default
settings:
Parameter name Default Other settings
Camera Mode Photo Video
Format SD Enter
Photo Size 5MP 8MP,1.3MP
Video Size 1280x720 640x480
Set Clock Enter
Photo Burst 1 Photo 2 Photos , 3 Photos
Video Length 10 Sec 1-60 Sec