Operation Manual

SG560K-8mHD 3 Easy Operations
Page
7
After switching the camera to ON position, the motion indication LED
(red) will blink for about 10s. This time interval is for you to make the
camera ready for automatic surveillance operation, e.g., to close the bottom
cover and to lock it, to fix the camera on a tree and to walk away. After
entering into the ON mode, no manual controls are needed and possible.
The camera will take pictures or videos automatically according to the
previous programmed settings, when human or animals enter into the
monitoring region.
3.4 Enter into the TEST Mode
There are 3 states in TEST Mode: preview state (preview the scene in
the front of the camera), setting state (make customer settings), and
playback state (view photos or videos via 2.0” TFT display).
3.4.1 Preview
After switching the camera to TEST Mode, it enters into the preview
state.
Press to exchange between playback mode and preview mode;
3.4.2 Customer Settings
Press MENU to manually customize the camera settings which displayed
on the screen. The detailed operations will be described in “Advanced
Operations” chapter.
3.4.3 Manual Capturing
Press to manually capture photos or record videos. Press again to
stop the manual capturing of a video.
3.4.4 View Images or Videos
Press
to view images or videos, the latest image or video will be