Operation Manual

SG560X-8mHD 4 Advanced Operations
Page 12
PIR. There are three parameters: High, Normal，
and Low. The default value is “Normal.” The
higher degree indicates that the camera is more
easily triggered by motion, taking more pictures
or recording more videos. It is recommended to
use high sensitivity degree in a room or
environment with little interference, and to use
low sensitivity for outdoor or environment with
lots of interferences like hot wind, smoke, near
window, etc. Furthermore, the sensitivity of the
PIR is strongly related to the temperature.
Higher temperature leads to lower sensitivity.
Therefore it is suggested to set a higher
sensitivity for high temperature environment.
Time Stamp This parameter defines whether the date and
time should be stamped on the pictures and
video clips or not.
Timer Switch This parameter defines a certain time lapse in a
day when the camera can be triggered, while in
the rest of the time lapse the device is shut off.
The effective value ranges from 00:00:00 to
23:59:59.
The default set is Off which means the camera
works all along. Timer switch On means the
camera works only during the time lapse