Operation Manual

SG560X-8mHD 2 Cautions
Page
6
2 Cautions
★ The working voltage of the camera is 6V. The camera is supplied
by 8 AA batteries.
★ Please install batteries according to shown polarity.
★ Must insert the SD card before power on camera. The camera
will not work properly unless a working SD card is detected by
the camera.
★ Please unlock the write-protect before inserting the SD card.
★ Please insert the SD card when the power switch is at OFF
position before testing the camera. The camera has no internal
memory for saving images or videos. If no SD card is inserted,
the camera will shut down automatically after a continuous
indication sound.
★ Please do not insert or take out the SD card when the power
switch is at ON position.
★ It is recommended to format the SD card by the camera when
used for the first time. Many other SD cards formatted by other
cameras have poor compatibility with different brands of
cameras. So， it is best to format the SD card with this camera or
on a computer.
★ In the SETUP mode, the camera will shut down automatically
after 3 minutes if no operation is done. Please turn on the power
again if you want to continue to work with the control.