Operation Manual

SG565F-8mHD 3 Easy Operations
Page
9
OFF mode: to turn off the camera.
TEST mode: to set operational parameters or
to playback the photos via display screen.
ON mode: to work at surveillance state.
Before switching on, please pay attention to
the following:
1. Avoid temperature and motion disturbances
in front of the camera such as big leaf,
curtain, air-conditioner, air outlet of the
chimney, and other heat sources to prevent
false triggering.
2. The height from ground for placing the
camera should vary with the object size
appropriately. In general, one to two meters
are preferred.
In the TEST mode, it is required to connect
the control in order to do further customize
settings. When the user completes the settings,
it is required to unplug the control to enter into
normal use, that is, if the wired control is still
connected with the camera, the camera will not
work. The camera (the control must be
unplugged when in ON mode) will take pictures
or videos automatically according to the default
settings or preset customer settings.
Slide the power switch to the ON position
to power on the camera and enter into the ON