Operation Manual

SG565F-8mHD 5 Mounting the Camera

Page

5 Mounting the Camera

When you want to use the ON mode of the

camera in the outdoors, such as hunting and

monitoring the living habits of wild animals, you

must mount the device on a certain place

properly. It is recommended to mount the

camera on a tree whose diameter is about 15 cm.

To get the optimal picture quality, the tree can

be 5 meters away from the place to be monitored,

and at a height of 1.5~2 meters. The aiming

direction of lens and the movement direction of

the object should be orthogonal.

There are two ways to mount the camera:

Use the belt: using the belt to fix the camera

on a tree is illustrated below. Take the belt toes

to go through the two back holes of the camera.

At the end, tie the two toes to the tree to finish

fixing.

Using bottom screw

Fig. 6 : Belt mount