Operation Manual

SG565F-8mHD 2 Cautions
Page
5
2 Cautions
★ The working voltage of the camera is 6V. It is
supplied by eight or four AA batteries.
★ Please insert the SD card when the power
switch is at OFF position before testing the
camera. The camera has no internal memory
for saving images or videos. If no SD card is
inserted, the camera will shut down
automatically after a continuous indication
sound.
★ Please unlock the write-protect before
inserting the SD card. Don’t insert or take out
the SD card when power switch is at ON
position.
★ In the TEST mode (insert the control into the
USB interface then switch the camera to ON
position), the camera will shut down
automatically after 3 minutes if no operation is
done. Please turn on the power again if you
want to continue to work with the control.
★ The camera will be in USB mode when
connected to a USB port of a computer. In this
case, the SD card functions as a removable disk.
★ Please ensure sufficient power when having
firmware upgrade, if any fault occurs after
improper upgrading process, the camera may