Operation Manual

SG565F-8mHD 3 Easy Operations
Page
7
3 Easy Operations
3.1 Power Supply
To supply power for the camera, eight AA size
batteries are needed.
Open the camera to confirm that the power
switch is at OFF position. Install the fully
charged batteries into the depot according to the
polarities sign shown below. The following
batteries with 1.5V output can be used:
1. High-density and high-performance alkaline
batteries (recommended)
2. Rechargeable alkaline batteries
3. Rechargeable NiMH batteries
When in low-battery state, camera will
automatically shut down after two indication
sounds. Please change the batteries in time.
Fig. 5 :Battery slot
Caution: Risk of explosion if battery is
replaced by an incorrect type. Also dispose of
used batteries according to the instructions.