Operation Manual

SG880MK-8M 3 Quick Introductions
Page 8
3 Quick Start Guide
3.1 Power Supply
Use 8 or 4 AA batteries for power supply
3.2 Insert SD card and SIM card
Insert an unlocked SD card and an available GPRS enabled
SIM card.
3.3 Check cards status
Slide the power switch to the TEST position and enter into
the TEST mode.
Allow approximately 10-20 seconds for the camera to
acquire a signal.
is the correct SIM card status and the available space of
SD card should be a none zero value.
3.4 Send MMS in TEST mode
Press MENU on the remote control to enter into the menu
settings.
Enter Send Mode submenu and set Send Mode as Manual.