Operation Manual

SG880MK-8M 4 Advanced Operations
Page 13
Video
Length
Choose duration of recording video.
Video Sound Choose if the sound recorder will be used.
PIR Interval
This parameter indicates how long the PIR
(Passive Infrared motion sensor) will be disabled
after each triggering in ON mode. During this time
the PIR of the device will not react to the motion of
human (or animals).
The minimum interval is 0 second. It means the
PIR can work all the time.
The maximum interval is 1 hour. It means the PIR
will be disabled for 1 hour after each triggering.
PIR
Sensitivity
Choose sensitivity of the PIR. The camera PIR is
strongly related to the temperature. On high, the
camera will trigger more easily. Therefore we
recommend the High setting for temperatures
exceeding 95 degrees Fahrenheit. Use the Low
setting for temperatures below 35 degrees
Fahrenheit to reduce false triggers. For normal use
of the camera, the Normal mode is recommended
and is the default setting.
Timer
Switch
The camera can be set to only record/capture at a
certain time of the day when set to On. The rest of
the time the camera will be shut off and will not
record any triggers set off by movement. This
function can be set to Off and will function to the
interval settings.
MMS Set
The camera sends MMS message through GPRS
network, so before using this function, you need to
open GPRS service from your service provider. It
supports four bands ：850MHz, 900MHz,
1800MHz and 1900MHz.
You should set the right MMS setting parameters.
The settings of MMS: URL, APN, IP and Port.
Please contact the network service provider if you
are not familiar with the settings.
GPRS Set
The camera sends image through GPRS network
with SMTP protocol to a Email address. Use this