Operation Manual

SG880MK-8M 2 Cautions
Page 7
2 Cautions
★The working voltage of the camera is 6V. The camera is
supplied by 8 or 4 AA batteries.
★Please install batteries according to shown polarity.
★Must insert the SD card before power on camera. The camera
has no internal memory for saving images or videos. The
camera will not work if there is no SD card.
★Must make sure that your SIM card supports the GPRS data
business.
★When going into the TEST mode, allow approximately 10-20
seconds for the camera to acquire a signal.
★Please unlock the write-protect switch before inserting the
SD card.
★Please do not insert or take out the SD card when the power
switch is at ON position.
★It is recommended to format the SD card by the camera when
used for the first time. Many other SD cards formatted by
other cameras have poor compatibility with different brands
of cameras. So it is best to format the SD card with this
camera or on a computer.
★In the TEST mode, the camera will shut down automatically
after 3 minutes if no operation is done. Please turn on the
power again if you want to continue to work with the control.