Infrared Mobile Digital Scouting Camera User’s Manual SG880MK-8mHD/MG882K-8mHD
Content 1 Instruction ..............................................................................1 1.1 General Description .......................................................1 1.2 Camera Body Interfaces ................................................ 2 1.3 Remote Control ............................................................. 2 1.3.1 Navigating................................................................. 4 1.3.2 Characters .................................................................
SG880MK-8mHD/MG882K-8mHD 1 Instruction 1 Instruction 1.1 General Description This camera, a digital scouting camera with black IR and MMS function, is a digital infrared surveillance camera, triggered by any movement of humans or animals monitored by a high sensitive Passive Infrared (PIR) motion sensor, and then automatically captures high quality pictures (up to 8M pixels) or records video clips (720P HD) according to default settings or preset customer settings.
SG880MK-8mHD/MG882K-8mHD 1 Instruction 1.2 Camera Body Interfaces The camera has the following I/O interfaces: USB connector, SD card Slot, TV output and external DC power connector. Take a few moments to familiarize yourself with the camera controls and displays. It is helpful to bookmark this section and refer to it when reading through the rest of the manual. Fig.1 Diagram of camera functional indicators 1.
SG880MK-8mHD/MG882K-8mHD 1 Instruction primarily used for customer settings and password input. This is an infrared type Menu 2 abc 1 wireless remote control. The maximum remote distance is 30 feet. Cancel OK 3 def 4 5 6 ghi jkl mno 7 8 9 pqrs tuv wxyz * 0 # Fig.2 Remote control Note: The remote will not work properly without the antenna attached. When power on the camera, allow approximately 10-20 seconds for the camera to acquire a signal.
SG880MK-8mHD/MG882K-8mHD 1 Instruction 1.3.1 Navigating Press UP or DOWN to select or highlight the menu item. Press LEFT or RIGHT to select the option of each item and press OK to make a selection. 1.3.2 Characters When entering digits, letters or punctuations into an input column, there are some useful characters that can be used by pressing the button continuously: 1 : 1./:@_ : 0+- Press the punctuation “*” for laser pointer. 1.
SG880MK-8mHD/MG882K-8mHD 1 Instruction Fig.4 Shooting information display 1.5 MMS/GPRS function This camera can send pictures instantly to your mobile device via GSM/GPRS network. You’ll be alerted just when a picture or video has been taken. The camera sends MMS message through GPRS network, so before using this function, you need to open GPRS service from your service provider. It supports four bands ： 850MHz, 900MHz, 1800MHz and 1900MHz.
SG880MK-8mHD/MG882K-8mHD 1 Instruction There are 4 submenu settings within the MMS/GPRS function. They are Send Mode, MMS Set, GPRS Set and Send to. Send Mode means to choose a way to send MMS (refer to 4.1 table). MMS Set and GPRS Set means to have the right MMS and GPRS setting parameters according to your network. Send to means to input the phone number or email address which you want to send to. All 4 submenus must be correctly set up.
SG880MK-8mHD/MG882K-8mHD 2 Cautions 2 Cautions ★Please install batteries according to shown polarity. ★Please unlock the write-protect before inserting the SD card. ★Please insert the SD card when the power switch is in the OFF position before testing the camera. The camera has no internal memory for saving images or videos. If no SD card is inserted, the camera will shut down automatically after a continuous indication sound.
SG880MK-8mHD/MG882K-8mHD 3 Quick Start Guide 3 Quick Start Guide 3.1 Power Supply To supply power for the camera, four or eight size AA batteries are needed. The following batteries with 1.5V output can be used: 1. High-density and high-performance alkaline batteries (Recommended) 2. Rechargeable alkaline batteries 3. Rechargeable NiMH batteries There are four battery slots. Slot 1 and 2 form one group and is marked “1”while slot 3 and 4 form the other group and is marked “2”.
SG880MK-8mHD/MG882K-8mHD 3 Quick Start Guide Fig.5 Battery install Caution: Risk of explosion if battery is replaced by an incorrect type. Also dispose of used batteries according to the instructions. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU.
SG880MK-8mHD/MG882K-8mHD 3 Quick Start Guide locked) position otherwise the camera will not function correctly. 3.3 Do the Camera Settings Down load the camera set up software (BMC_config.zip) from our website. The specified website is written in the last page of the manual.
SG880MK-8mHD/MG882K-8mHD 3 Quick Start Guide 3.4 Enter into the TEST Mode Slide the power switch to the TEST position and enter into the TEST mode. There are some functions in TEST mode: Custom settings, manual capture, preview or send MMS manually. The remote control is needed in this mode 3.4.1 Custom Settings Press MENU on the remote control to enter into the menu setting. The camera can be adjusted to manually customize the camera settings which display on the LCD screen on the camera.
SG880MK-8mHD/MG882K-8mHD 3 Quick Start Guide 3.5 Power on and Enter into the ON Mode Slide the power switch to the ON position to power on the camera and enter into the ON mode. Before entering into the ON mode, you can adjust the camera towards the target monitoring area by laser pointer. After switching on the camera, the motion indication LED (red) light will blink for about 10s. The 10s is a buffering time before automatically capturing photos or videos, e.g.
SG880MK-8mHD/MG882K-8mHD 3 Quick Start Guide page of the manual. 3.7 SMS Command List Below is a SMS command list for example. No Function 1 Set Supper User 2 Set MMS Parameters 3 Set GPRS Parameters Set Normal Users Phone Set Receive 5 Email Address Get On Spot 6 Photo 4 SMS Command #sg880#4321#13800138000# #mg882#4321#13800138000# #m#http://mmsc.cingular.com#6 6.209.11.32#8080#wap.cingular# account#password# (The example parameters are for the carrier of AT&T) #s#bmctest123@163.
SG880MK-8mHD/MG882K-8mHD 9 Format TF Card Set Administrator’s 10 Password 11 Help 3 Quick Start Guide hour) #F# #P#0000# #H# 3.8 Power Off Slide the power switch to the OFF position to power off the camera. Please note that even in the OFF mode, the camera still consumes a small amount of battery power. Therefore, please remove the batteries if the camera is not in use for a length of time.
SG880MK-8mHD/MG882K-8mHD 4 Advanced Operations 4 Advanced Operations From the basic operations of the camera previewed in the previous chapter, we know that the camera has three basic operation modes: 1. OFF mode: Power switch is in the OFF position. 2. ON mode: Power switch is in the ON position. 3. TEST mode: Power switch is in the TEST position. In the above three modes, the OFF mode is the specified safe mode when replacing the SD card or batteries and transporting the camera.
SG880MK-8mHD/MG882K-8mHD Camera Mode 4 Advanced Operations Choose capturing images or recording videos. Set camera date and time. You can change the date and time of the device by setting this parameter when necessary, e.g., after every Set Clock battery change. The date format is month/day/year, the time format is hour: minute: second. The valid value for year is between 2009 and 2050. Choose the image size, e.g. 8 mega pixels or Photo Size 5 mega pixels.
SG880MK-8mHD/MG882K-8mHD 4 Advanced Operations PIR. There are four sensitivity parameters: High, Normal, Low and Off. The default value is “Normal”. The higher degree indicates that the Camera is more easily to be triggered by motion, taking more pictures or recording more videos. It is recommended to use high sensitivity degree in room or environment with little interference, and to use lower sensitivity for outdoor or environment with lots of interference like hot wind, smoke, near window etc.
SG880MK-8mHD/MG882K-8mHD 4 Advanced Operations service provider. You should set the right MMS setting parameters. The settings of MMS: URL, APN, IP and Port.. Please contact the network service provider if you are not familiar with the settings. The camera sends image through GPRS network with SMTP protocol to an Email address. Use this way the communication cost will be much cheaper in many countries. GPRS Set You should set the right GPRS setting parameters.
SG880MK-8mHD/MG882K-8mHD 4 Advanced Operations show you the latest photo and the total qty of the pictures get taken. If it is on Video mode, the camera will send a SMS at the preset time. The SMS will show you how many video clips the camera has taken within 24 hours. 3) “Instant”: Instant, just works in ON mode, which means the camera will send a MMS instantly after it captures a photo. You can choose the number of how many pictures you want it to send out per day.
SG880MK-8mHD/MG882K-8mHD Version Format SD Default Set 4 Advanced Operations Also you can retrieve live pictures any time. But the power consumption will be a little bigger than normal hunting status. This parameter shows the information about Firmware and IMEI of this camera. All images and videos in the SD card will be deleted, so make sure that you have made a backup of important data, Restore all customer settings to default values. 4.
SG880MK-8mHD/MG882K-8mHD 4 Advanced Operations GPRS Set Enter Send Mode Manual SMS Control Phone[MM S] Off Version Enter Format SD Default Set Enter Save Send To Server, Port, APN Daily Report, Instant, Off Email[MMS], Email[GPRS] On Firmware IMEI Yes, No 4.3 Playback In playback mode, images or videos can be viewed and deleted. An image can also be manually sent by MMS or GPRS. It can only be done in TEST mode. The images can be viewed on the LCD screen on camera.
SG880MK-8mHD/MG882K-8mHD 4 Advanced Operations View the image (or video) which to be deleted, select the one you want to delete. Press DELETE and LEFT or RIGHT to select all, then OK to delete. 4.4 Laser Pointer The laser light pointer beam can be turned on as an additional function for pointing to an object or a certain region of interested (ROI) by pressing ﹡of the remote. NOTE: Please note that the laser could be harmful to the eyes if pointed at another person. 4.
SG880MK-8mHD/MG882K-8mHD Appendix I: PIR Detection Zone Appendix I: PIR Detection Zone Figure 6 shows Bolymedia’s 4 kinds of detection range at different detection angles. Fig.6 Different detection range The PIR detection angle (α) is just smaller than the field of view (FOV) angle (β). The advantage of this design is to reduce empty picture rate and capture most, if not all, motions. Fig.7 Detection angle VS F.O.
SG880MK-8mHD/MG882K-8mHD Appendix I: PIR Detection Zone This camera has a new design of PIR and the new PIR is patented. The new patented PIR’s detection range of SG880M-8mHD can reach to 73ft, while MG882K-8mHD with 85ft in good environments. Figure 8 shows the compared detection zone between normal PIR and the new patented PIR. Fig.
SG880MK-8mHD/MG882K-8mHD AppendixⅡ: Technical Specifications AppendixⅡ: Technical Specifications Image Sensor Lens PIR detection range Display Screen Memory Card Picture Resolution Video Resolution PIR Sensor PIR Sensitivity Trigger Time Weight Operation/Storage Tem. Interval Photo Burst Video Length Power Supply Low Battery Alert Sound Recording Mounting Dimensions Operation Humidity Security Authentication *without battery 5MP Color CMOS, 8MP Interpolation F/NO=2.
SG880MK-8mHD/MG882K-8mHD Appendix Ⅲ: Parts List AppendixⅢ: Parts List Part Name Quantity Digital Camera One Wireless Remote One USB Cable One Belt One User Manual One Enhanced Antenna One Warranty Card One Website Information: Down load the APP software from here: http://www.bolyguard.com/download.html Version 1.
