Infrared Digital Scouting Camera User’s Manual SG968D/S-10M
Content 1 Instruction........................................................................................... 1 1.1 General Description...................................................................... 1 1.2 Application ..................................................................................... 1 1.3 Camera Overview .......................................................................... 2 1.4 Saving Images or Videos..............................................................
SG968D/S-10M 1 Instruction 1 Instruction 1.1 General Description This camera is a surveillance device working automatically. It can be triggered by any movement of human (or animals) in a certain region of interest (ROI) monitored by a highly sensitive Passive Infra-Red (PIR) motion sensor, and then take high quality pictures (up to 10 mega pixels) or video clips.
SG968D/S-10M 1 Instruction homes, shops, schools, depots, offices, taxis, work sites etc. It can also be used as a trail camera for hunting or monitoring animals by recording the traces of wild animals. It can be left alone for weeks and months and will save event records automatically in digital format. 1.3 Camera Overview 1.3.1 Diagram of Camera functional indicators The camera has the following interfaces: a 2.
SG968D/S-10M 1 Instruction Fig. 1: Front view Fig.
SG968D/S-10M 1 Instruction Fig. 3: Bottom view 1.3.2 Key Notes “MENU”: to enter the program menu in preview mode; “▲”“▼”“◄”“►”: for parameter settings as described in the user’s manual. “OK”: to save parameter settings and play videos. “ ”: to exchange between playback and preview. “DEL”: to delete an image. “ ”: to capture a photo or record a video manually. 1.3.3 Shooting Information Display Fig. 4 shows a sample of the LCD Display of the Programming Menu.
SG968D/S-10M 1 Instruction Fig. 4: LCD Display 1.4 Saving Images or Videos The camera uses a standard SD (Secure Digital) memory card to save images (in .jpg format) and videos (in .avi format). SD and SDHC (High Capacity) cards up to a maximum 32 GB capacity are supported. Before inserting the SD card be sure that the SD card is unlocked.
SG968D/S-10M 2 Cautions 2 Cautions ★The working voltage of the camera is 6V. The camera is supplied by four or eight AA batteries. ★Please install batteries according to shown polarity. ★Must insert the SD card before power on camera. The camera will not work properly unless a working SD card is detected by the camera ★Please unlock the write-protect before inserting the SD card. ★Please insert the SD card when the power switch is at OFF position before testing the camera.
SG968D/S-10M 3 Easy Operations 3 Easy Operations 3.1 Loading batteries Use 8 or 4 AA batteries or 6V external battery for power supply (Fig. 5). Fig. 5: Battery Configurations of 8 or 4 batteries Please use high-capacity and high-performance alkaline batteries (recommended), rechargeable Lithium batteries or rechargeable NiMH batteries. 3.2 Inserting the SD card The camera has no internal memory for saving images or videos. If no SD card is inserted, the camera will shut down automatically.
SG968D/S-10M 3 Easy Operations 3.3 Dismantling the external filter The camera has a specific function that you can dismantle the covered external filter to take color night picture at Mount Off. Fig. 6: Dismantle the external filter 3.4 Powering on and Entering into the ON Mode The camera has three basic operation modes: 1. OFF mode: to turn off the camera. 2. SETUP mode: to set up camera or to playback the photos or video clips. 3.
SG968D/S-10M 3 Easy Operations region. After switching the camera to ON position, the motion indication LED (red) will blink for about 10 seconds. This time interval is for you to make the camera ready for automatic surveillance operation, e.g., to close the bottom cover and to lock it, to fix the camera on a tree and to walk away. 3.5 Power Off Switch the camera to OFF position to power off the camera. Please note that even in the OFF mode, the camera still consumes certain power at μA level.
SG968D/S-10M 4 Advanced Operations 4 Advanced Operations After you are familiar with the basic operations of the camera, you are now ready for advanced operations,and the options and parameters of the camera are explained in more detail. 4.1 Enter into the SETUP mode There are 3 states in the SETUP mode: preview state (preview the scene in the front of the camera), setting state (make customer settings), and playback state (view photos or videos via the 2.0” LCD display). 4.1.
SG968D/S-10M 4 Advanced Operations button just works in Playback state. So if it’s in Preview to enter into Playback state first. state, you should press 4.2 Triggering modes There are 3 triggering modes of the camera: PIR trigger,Time lapse (i.e. Timer trigger) and both PIR trigger & Time lapse. 4.2.1 PIR trigger PIR trigger is the default setting. The camera works only when motions are detected. If PIR trigger is set as PIR Off, the camera stops PIR trigger. 4.2.
SG968D/S-10M 4 Advanced Operations 4.3.1 Setting Items Setting Items Description Choose dismantling the external filter or not. If you have dismantled the external filter, please choose this submenu as Mount Off. Otherwise, External Filte select Mount On. When you choose Mount On, the camera will take B&W pictures at night, in Mount Off, camera takes color pictures at night. Both cameras will take color pictures and videos at daytime. There are three camera modes: Photo, Video and Pic+Video.
SG968D/S-10M 4 Advanced Operations press “▲” or “▼” to change the value. Photo Size 5MP (mega pixels) or 10MP (mega pixels). It means the shooting number of each Photo Burst triggering in Photo mode. You can choose from 1 to 6 Photos. Video Size Choose the video size: 1280x720 or 640x480. Video Length It extends from 10 to 180 seconds with a step of 10s.
SG968D/S-10M 4 Advanced Operations then the Time Lapse can’t be set to Off. This parameter defines the sensitivity of the PIR. There are four parameters: High, Normal, Low and Off. The default value is “Normal”. The higher degree indicates that the camera is more PIR Trigger easily triggered by motion, taking more pictures or recording more videos.
SG968D/S-10M 4 Advanced Operations hour after each triggering). Please note that there are a few seconds of internal processing delay between each trigger, even if 0 second is set. It means camera position. You can set A-Z Camera Posit position for your camera, so that you can distinguish which photo is taken by which camera. If you choose “Enter”, the system will delete all Format SD images or videos stored in the SD card. So make sure that you have made a backup of important data.
SG968D/S-10M 4 Advanced Operations Photo Burst 1 Photo 2~6 Photos Video Size 1280x720 640x480 Video Length 10 Sec 20~180 Sec Work Hour Off On (00:00~23:59) Time Lapse Off 5 Min to 8 Hour PIR Trigger Normal High, Low, Off PIR Interval 5 Sec 0-55 sec, 1-5 Min,10-60 Min Camera Posit Off A~Z Position Format SD Enter Default Set Save Version Enter 4.4 Firmware upgrade This camera provides an upgrading function for the users.
SG968D/S-10M 5 Mounting the Camera 5 Mounting the Camera When using the camera in outdoor environment, such as scouting or monitoring the living habits of wild animals, you need to mount the device on a certain place properly. It is recommended to mount the camera on a tree with diameter about 5.9 inches (15cm). To get the optimal picture quality, the recommended distance is 5m from the tree to the target monitoring area and recommended height from the ground is 4.9ft~6.5ft (1.5m~2m).
SG968D/S-10M Appendix Ⅰ:PIR Detection Zone Appendix I: PIR Detection Zone Fig. 8 shows Bolymedia’s 4 kinds of detection range at different detection angles. This camera is super long range. Fig. 8: PIR Detection Zone The PIR detection angle (α) is just smaller than the field of view (FOV) angle (β). The advantage of this design is to reduce empty picture rate and capture most, if not all, motions. Fig.9: Detection angle vs.
SG968D/S-10M Appendix Ⅰ:PIR Detection Zone This camera has a new, patented design of PIR. The new patented PIR’s detection range can reach to 100ft (in good environments). Fig. 10 shows the comparison of the detection zones between normal PIR and the new patented PIR. Fig.
SG968D/S-10M AppendixⅡ: Technical Specifications AppendixⅡ: Technical Specifications 5MP Color CMOS, 10MP interpolation SG968D-10M FOV=100° Lens SG968S-10M FOV =70° Up to 80ft Lighting Range(with Flash) Detection Range Up to 100ft Display Screen 2.0” TFT Memory Card Up to 32 GB 10MP = 3648 ×2736 Picture Resolution 5MP = 2560×1920 1280x720(20 or 30fps) Video Resolution 640×480 (30fps) SG968D-10M 70° PIR Sensor SG968S-10M 60° PIR Sensitivity Adjustable (High/Normal/Low) Trigger Time < 1.2 s Weight 0.
SG968D/S-10M Appendix Ⅲ: Parts List Appendix Ⅲ: Parts List Part Name Digital Camera USB Cable Belt User’s Manual Warranty Card Security Box Quantity One One One One One Option (Version 1.