Operation Manual

In order to burn any manufacturing residue, h
the closed oven for approx. 70 minutes at 200°C.
Use the heating function [
Upper/lower
switch to the heating function [Grill] for an
20 minutes.
NOTE
NOTENOTE
NOTE:
: :
:
The occurring odor and possibly a slight smoke
development cannot be avoided. Therefore e
sure for a good ventilation of the room during
heating.
Operation
OperationOperation
Operation
1
11
1 Level
LevelLevel
Level
regulator of cooking zones
regulator of cooking zonesregulator of cooking zones
regulator of cooking zones
The temperature setting is
set for each cooking zone
separately by using the
respective level regulator.
= Position of cooking zone
= Off-Position
1
11
1 = L
owest setting (keep food warm)
6
66
6 = H
ighest setting (quick heating, quick
roasting)
2
22
2 Cooking zone
Cooking zone Cooking zone
Cooking zone power
power power
power control lamp
control lampcontrol lamp
control lamp
The power
control lamp indicates the operation of the
cooking zones
. It lights up as soon as
is put into operation and goes off if all level regulators
points to the off-position.
3
33
3 Oven function selector switch
Oven function selector switchOven function selector switch
Oven function selector switch
The function selector switch is used to set the type of
heating.
Rotate the function selector switch until the
icon for the desired
type of heating points upwards.
4
44
4 Oven temperature selector switch
Oven temperature selector switchOven temperature selector switch
Oven temperature selector switch
The temperature selector
switch is used to adjust the
oven temperature.
The thermostat allows the te
perature setting from 50°C to 250°C.
7
In order to burn any manufacturing residue, h
eat
the closed oven for approx. 70 minutes at 200°C.
Upper/lower
heat]. Then
switch to the heating function [Grill] for an
other
The occurring odor and possibly a slight smoke
development cannot be avoided. Therefore e
n-
sure for a good ventilation of the room during
set for each cooking zone
respective level regulator.
owest setting (keep food warm)
ighest setting (quick heating, quick
cooking,
control lamp indicates the operation of the
. It lights up as soon as
a cooking zone
is put into operation and goes off if all level regulators
The function selector switch is used to set the type of
Rotate the function selector switch until the
type of heating points upwards.
switch is used to adjust the
The thermostat allows the te
m-
perature setting from 50°C to 250°C.
CAUTION:
CAUTION:CAUTION:
CAUTION:
Turn the temperature selector switch only clockwise
and back again. Otherwise the switch will be da
aged.
5
55
5 Oven t
Oven tOven t
Oven temperature
emperature emperature
emperature
control lamp
control lampcontrol lamp
control lamp
The temperature
control lamp
operation. If the lamp goes
off
ture is reached.
During operation, the oven must continuously rehea
to keep the temperature stable. When reheating the
control lamp is lighting (thermostat function).
NOTE
NOTENOTE
NOTE:
::
:
If the recipe
recommends putting the food in the pr
heated oven only
, this should not be done before the
control lamp turns off for the first time
Oven lighting
Oven lightingOven lighting
Oven lighting
The oven lighting automatically turns on as soon as
the oven is in operation.
Using the accessory
Using the accessoryUsing the accessory
Using the accessory
Inside the oven are levels
for
ries. The accessories are safely used between the
side levels.
CAUTION:
CAUTION:CAUTION:
CAUTION:
Always insert
the accessory completely into the o
en; otherwise the glass door can be scratched.
Dish carriage
Dish carriageDish carriage
Dish carriage
The roller-
mounted drawer beneath the oven
ber
is used to store the accessories.
Selecting appropriate cookware
Selecting appropriate cookwareSelecting appropriate cookware
Selecting appropriate cookware
Wrong
WrongWrong
Wrong!
!!
!
Cookware is too small.
Heat loss!
Cookware ground uneven.
Poor heat transfer!
Turn the temperature selector switch only clockwise
and back again. Otherwise the switch will be da
m-
control lamp
control lampcontrol lamp
control lamp
control lamp
indicates the heating
off
, the set oven tempera-
During operation, the oven must continuously rehea
t
to keep the temperature stable. When reheating the
control lamp is lighting (thermostat function).
recommends putting the food in the pr
e-
, this should not be done before the
control lamp turns off for the first time
.
The oven lighting automatically turns on as soon as
for
inserting the accesso-
ries. The accessories are safely used between the
the accessory completely into the o
v-
en; otherwise the glass door can be scratched.
mounted drawer beneath the oven
cham-
is used to store the accessories.
Selecting appropriate cookware
Selecting appropriate cookwareSelecting appropriate cookware
Selecting appropriate cookware
Cookware is too small.
Cookware ground uneven.
Poor heat transfer!