Operation Manual

• If possible, always cover t
he cookware on the
cooking zone with a lid.
•
Switch off the cooking zones before
cooking time,
to use the residual heat.
Cleaning and Maintenance
Cleaning and MaintenanceCleaning and Maintenance
Cleaning and Maintenance
WARNING:
WARNING:WARNING:
WARNING:
•
Always switch off the appliance completely and
required, disconnect
it from the power supply
fore cleaning and user maintenance.
•
Allow the appliance to cool down sufficient
cleaning.
• Do not
use steam cleaners for cleaning the
ance;
moisture could enter electrical components.
Risk of electric shock!
Risk of electric shock!Risk of electric shock!
Risk of electric shock!
Hot steam
the plastic parts.
• N
ever use flammable substances, such as thi
ner, kerosene,
gasoline or acids for cleaning
•
The appliance must be dry before restarting ope
ation.
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
•
Do not use a wire brush or other sharp, abrasive
items.
• Do not use
harsh abrasive cleaners or sharp me
al objects for cleaning the glass surface. The su
faces can be scratched or destroyed.
• Always consider
the application and safety notes
of the detergent.
Cleaning the hob
Cleaning the hobCleaning the hob
Cleaning the hob
•
Clean the hob and the cooking zones with a soft,
damp cloth or a commercial cleaner.
•
Ideally, you maintain the steel hobs in lukewarm
state after cleaning with some lubricating oil (a
very thin oil film is sufficient).
10
he cookware on the
Switch off the cooking zones before
ending the
to use the residual heat.
Cleaning and Maintenance
Cleaning and MaintenanceCleaning and Maintenance
Cleaning and Maintenance
Always switch off the appliance completely and
if
it from the power supply
be-
fore cleaning and user maintenance.
Allow the appliance to cool down sufficient
before
use steam cleaners for cleaning the
appli-
moisture could enter electrical components.
Hot steam
could damage
ever use flammable substances, such as thi
n-
gasoline or acids for cleaning
.
The appliance must be dry before restarting ope
r-
Do not use a wire brush or other sharp, abrasive
harsh abrasive cleaners or sharp me
t-
al objects for cleaning the glass surface. The su
r-
faces can be scratched or destroyed.
the application and safety notes
Clean the hob and the cooking zones with a soft,
damp cloth or a commercial cleaner.
Ideally, you maintain the steel hobs in lukewarm
state after cleaning with some lubricating oil (a
Removing the oven door
Removing the oven doorRemoving the oven door
Removing the oven door
You may remove the oven door to facilitate cleaning
a
nd to get better access to the oven interior.
• Open the appliance
door completely.
• Push the retaining
bracket
the hinges on both sides upwards.
• Slightly close the
door and
•
When reinstalling the door, m
of the hinge is properly aligned with the protrusion
of the hinge holder.
• Then press down the
Then press down the Then press down the
Then press down the
retaining brackets (a)
retaining brackets (a)retaining brackets (a)
retaining brackets (a)
otherwise the hinges could get damaged when
closing the oven door.
Cleaning the oven
Cleaning the ovenCleaning the oven
Cleaning the oven
NOTE
NOTENOTE
NOTE:
::
:
By cleaning after each use,
you avoid that food r
siduals and soiling
will be burning
eration. Then the c
leaning is
of effort.
• Clean the appliance
and accessories depending
on the soiling
degree and depending on the su
face only with a so
ft, damp cloth and commercia
ly, food safe cleaners.
•
Soak heavily soiled areas with some warm soapy
water or a vinegar cleaner.
• Wipe of
f grease residues from the sealing framed
the cooking chamber.
•
Use a soft absorbent cloth for drying after clea
ing.
Cleaning the glass panel
Cleaning the glass panelCleaning the glass panel
Cleaning the glass panel
If necessary, clean the inside of the glass pane
•
Open the appliance door.
•
Press the release tabs at the side of
strip in order to remove
it.
You may remove the oven door to facilitate cleaning
nd to get better access to the oven interior.
door completely.
bracket
s (a) of
the hinges on both sides upwards.
door and
lift it up to remove it.
When reinstalling the door, m
ake sure the notch
of the hinge is properly aligned with the protrusion
retaining brackets (a)
retaining brackets (a)retaining brackets (a)
retaining brackets (a)
again,
again,again,
again,
otherwise the hinges could get damaged when
you avoid that food r
e-
will be burning
-in at the next op-
leaning is
only possible with a lot
and accessories depending
degree and depending on the su
r-
ft, damp cloth and commercia
l-
Soak heavily soiled areas with some warm soapy
water or a vinegar cleaner.
f grease residues from the sealing framed
Use a soft absorbent cloth for drying after clea
n-
If necessary, clean the inside of the glass pane
l.
Open the appliance door.
Press the release tabs at the side of
the retaining
it.