HOUSEHOLD- ELECTRIC OVEN SET EHBC 562 IX Instruction Manual
Contents Introduction ……………………..………………….………………………………………………….….... Page 3 General Notes …...……………………………………….……………………………………………..…. Page 3 Special safety Information for this Unit ……………………………...…………………………….......... Page 4 Unpacking the Appliance …...………………………………..…………………………………………… Page 6 Appliance Equipment ……………………..….………………………………………………………….... Page 6 Installation …...…………………………………………………………………………………………..…. Page 6 Startup / Operation ……………………..………………………………………..…………………..........
and disconnect the plug (pull the plug itself, not Introduction the lead) or turn off the fuse. Thank you for choosing our product. We hope you • The appliance and if possible the mains lead have will enjoy using the appliance. to be checked regularly larly for signs of damage. If damage is found nd the appliance must not be used.
Special safety information for this Unit WARNING WARNING: NING: Danger from electrical current! Contact with live leads or components can be fatal! • The connection of the appliance must satisfy the relevant standards and regulations and may only be performed by an authorized specialist. • The hob may not be used if the glass surface has cracks or is broken. • Make sure that the appliance is turned off from the power supply (fuse) before changing the bulb in the oven.
• CAUTION: The cooking process must be observed. A short cooking operation is to be observed continuously. • Never store objects on the cooking surface. • The appliance is not intended for operation with an external timer or external remote control system. • Make sure that with installing adequate air circulations ensured and the ventilation slots are not blocked. • Never pour liquids into a hot oven! Scalding by rising water vapor as well as possible damage to enamel.
Unpacking the Appliance Installation • Remove the appliance from its packaging. WARNING: • Remove all packaging material, such as foils, filler The installation and the connection to the main power and cardboard packaging. may only be performed by an authorized specialist. • To prevent hazards, check the appliance for any CAUTION: CAUTION: transport damage. • The worktop,, the cabinet, veneers, veneers plastic coat- • In case of damage, do not put the appliance into ings, used adhesives etc.
Dimensions in mm • Attach the enclosed retaining clamps with the screws in the provided holes laterally of the hob. • Place the hob according to the hob drawing under "Appliance Overview" and with the connecting cac ble first centrally into the prepared cutout of the worktop. • Make sure that the distances to the cutting are equal on all four sides and that the seal is resting Preparing the worktop for installation of the hob on the worktop.
• The appliance is suitable for three-phase three and AC Startup / Operation current (220-240/380-415V 3N~ 50/60Hz 50 ). Before initial use • The appliance can be adjusted for single-phase single • Clean the oven interior with all therein located current by a respective bypass on the terminal block, based on the circuit diagram below. Select accessories. Follow the instructions that we give a suitable cord as mains cable, considering the you in the chapter "Cleaning and Maintenance".
3 Oven function selector switch fter connecting to the power supply the indication After The function selector switch is used to set the type of [00•00] is flashing.. Adjust the current time first, see heating. Rotate the function selector switch until the "Setting the time", in order to put the appliance into icon for the desired type of heating points upwards. operation.
eration will be started automatically in order to • Press the button (5) twice for the alarm, the sym- achieve the selected time of day for switch off. bol (3) flashes, symbol (4) lights up and the disdi play shows [00•00]. • At the e end of the set cooking time or when reachreac • Set the alarm time up to 23 hours and 59 minutes ing the preset time of day, the oven operation aua using the buttons (6). tomatically stops.
Oven lighting Switching on and off The oven lighting automatically turns on as soon so as ...the oven the oven is in operation. The oven is equipped with various functions. Baking can be done with top-, bottom-, bottom grill- and convection Using the accessory heat. Set the required operating perating conditions. CAUTION: • Set the oven function selector switch to the apa Always insert the accessory completely into the ovo propriate position. en; otherwise the glass door can be scratched.
Symbol • Before removing the cake, check if it is done by Description Top/bottom heat: The heating is done in a using a wooden stick.. When the cake is done, no conventional manner. The dish gets evenly dough residue will stick to the wooden wood stick. heated from the top and bottom. Suitable for baking and frying on one level. Cooking and roasting meat & fish Convection: With an additional heating • Only cook meat of maximum 1 kg in the oven.
the cooking / baking time. So your baking product Information to reduce the environmental environmental effect of even cooked in the stored oven heat. cooking • Put on the cookware before switching on the (acc. VO (EU) No. 66/2014 appendix I, No. 2) cooking zone. Oven • The base of the cookware and the cooking zone We recommend the use of dark baking molds and should use the same size. plates, because they conduct the heat better.
WARNING: • Then press down the retaining brackets (a) again, • The appliance must be dry before restarting operope otherwise the hinges could get damaged when ation. closing the oven door. CAUTION: CAUTION: Cleaning the oven • Do not use a wire brush or other sharp, abrasive NOTE: NOTE: items.
the strip. NOTE: • Take off the glass carefully forward. If a problem still persists after following the steps • Replace the glass panel and affix the retaining above, contact your distributor or an authorized techtec strip;; after you’ve cleaned the glass and dried it nician. thoroughly. Technical Data Reverse the bulb Electrical connection…………………………...……….. WARNING: Connection voltage: ....
WARNING: For maintenance purposes, the oven door can be Remove or disable any existing snap and bolt locks, hang out and reinstalled, for the procedure please if you take the unit out of operation or dispose it. refer to the manual. A further disassembly for maintenance purposes is Information to professional users for disassembly not provided. (acc. VO (EU) No. 66/2014 appendix I, No.
EU Product data sheet Product information for domestic electric hobs according EU 66/2014 Position Symbol Brand Value Unit BOMANN Model identification EHBC 562 562 IX Type of hob Hob of a built-in oven Number of cooking zones and/or areas 4 Heating technology (induction cooking zones and cooking areas, radiant cooking Radiant cooking zones zones, solid plates) For circular cooking zones or area: diame- Rear left 16.5 / 27.
Product information for domestic ovens according EU 6565-66/2014 Symbol Brand Value Unit BOMANN Model identification EHBC 562 562 IX Type of oven Built-in Mass of the appliance M Number of cavities 29 kg 1 Heat source per cavity (electricity or gas) Electricity Volume per cavity V 53 l Energy consumption (electricity) required to heat a standardised load in a cavity of an electric heated oven during a cycle in conventional mode per cavity (electric ECelectric cavity 0.
www.bomannwww.bomann-germany.de Made in P.R.C. 20 Stand 06/18 C.