User Manual HOUSEHOLDFRIDGE / FREEZER KG 180 Please read this manual carefully and keep for future reference! 1 07/2012
TABLE OF CONTENT OVERVIEW DISPOSAL OF USED DEVICES IMPORTANT USE AND SAFETY INSTRUCTIONS General safety precautions Risk of injury Coolant Intended use Unpacking PRODUT DESCRIPTION Delivery scope Specifications INSTALLATION Location Electrical connection REVERSE THE DOOR OPENING STARTUP / OPERATION Prior to first use Turning on Storing food Defrosting Operating noise Turning off TIPS FOR SAVING ENERGY MAINTENANCE AND CLEANING Cleaning and care Light Repairs What if . . .
IMPORTANT USE AND SAFETY INSTRUCTIONS General safety precautions All safety information in this user manual are marked with a warning symbol. They indicate possible dangers precociously. It is imperative to read and follow this information. - - Do not touch the plug at the mains cable with wet or moist hands when connecting or disconnecting. Risk of death by electric shock! In case of emergency, unplug the device immediately. Hold the plug when disconnecting the mains cable; do not pull the cable.
- Films and bags of PE (polyethylene) Strapping strips of PP (polypropylene) IMPORTANT: Make sure you dispose of packaging materials environmentally friendly. Removing the transport protection The device and parts of the interior are protected for transport. Remove all adhesive tapes from the right and left side of the door. You may remove adhesive residue with a cleaning solvent. Also remove any adhesive tapes and packaging materials from the inside of the device.
- 2009/125/EC framework for the setting of ecodesign requirements for energy-using - 643/2009/EC requirements for household refrigerating appliances. MANUFACTURER DATA: Product is subject to changes and improvements. INSTALLATION Location Sufficient ventilation around the device is necessary in order for the heat to dissipate properly and to guarantee efficient cooling operation at low power consumption. For this purpose, leave sufficient space around the device.
3. Dismount the upper door hinge by removing the hinge cover and unscrewing the screws. Open the fridge door a little and take the door carefully from the middle door hinge. Put the blind cap of the door B at the opposite side A and place the door on a padded surface to prevent it from scratches. 4. Dismount the two flange screws of the middle hinge. Take the freezer door from the lower door hinge and place it on a padded surface too. Put the cover caps at the opposite holes. 5.
Check if the doors are arranged vertical as well as horizontal, so that a smooth opening and closing of the doors is ensured. STARTUP / OPERATION Prior to first use ATTENTION: After transport, the device should be left standing for 4 hours in order for the oil to be collected in the compressor. Nonobservance could cause damage to the compressor and hence result in failure of the device. This would void your warranty claim. - Clean the interior of the device including all accessory parts located inside.
- Store fresh packed items on the glass shelves and fresh fruits and vegetables in the vegetable box. Place bottles in the door storage rack. Store meat well packed and only for 2 to 3 days. Avoid contact with cooked dishes. Let warm food cool down before putting it in the device. Freezer The freezer allows you to store frozen food at a temperature of -18°C or below (from a middle temperature control setting) for several months, to produce ice cubes and to freeze fresh good.
To achieve better cooling and to save energy, defrost the freezer regularly. To start the defrosting process turn the temperature control to the position 0 - OFF and disconnect the plug. Remove the food items and keep covered at a cool location. When the ice has melted, pour the condensate away and dry the interior of the device. You may then restart the device by connecting the plug and turning the temperature control. WARNING: Never use metal objects (e.g. knives) for removing ice from the vaporizer.
Please do as follows: - Remove all food and keep covered at a cool location. - Use warm water and a mild detergent for cleaning the interior (including rear side and bottom). - After thorough drying, restart operation. - WARNING: Do not bend the cooling coils. Do not use arenaceous abrasives. LED light If the LED light bulb is damaged, DO NOT CHANG IT BY THE USER! Changing the LED light bulb carry out by inexperienced persons may cause injury or serious malfunctioning.
Are you interested in other Bomann products? Please visit our website: www.bomann.de Distribution: C. Bomann GmbH • Heinrich-Horten-Str.
