Operation Manual

24
• Tilt the appliance slightly backwards and
block it in this position. Unscrew the feet.
Dismount the lower door hinge and the door
support assembly by loosening the screws.
• Attach the lower door hinge and the door
support assembly at the respective opposite
appliance side, after you have unscrewed
the hinge pin and used by the other hinge
side. Turn in the feet accordingly.
• Replace the appliance upright again. Insert the freezer door on the lower hinge pin and fix the door
to the property position.
• Turn the middle hinge about 180° and trans-
fer it at the opposite side. Put the hinge pin in
the hole of the freezer door and tight the
screws of the door hinge.
• Insert the fridge door on the middle hinge pin and fix the door to the property position.
• Transfer the upper door hinge on the oppo-
site appliance side, after you have un-
screwed the hinge pin and used by the other
hinge side. Put the hinge pin in the hole of
the fridge door and tight the screws of the
hinge.
• Check if the doors are arranged vertical as well as horizontal, so that a smooth opening and closing
of the doors are ensured.
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
Prior to first use
Prior to first usePrior to first use
Prior to first use
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
After transport, the appliance should be left standing for approx. four hours before connecting to the
power supply. Nonobservance could lead to malfunction of the cooling system and causes a break-
down of the appliance.
Clean the interior of the appliance including all accessory parts located inside. Consider the instruc-
tions which we provide in the chapter “Cleaning and Maintenance”.