User Manual HOUSEHOLDWASHING MACHINE WA 5612 Please read this manual carefully and keep for future reference! 1 06/2012
TABLE OF CONTENT OVERVIEW IMPORTANT USE AND SAFETY INSTRUCTIONS DISPOSAL OF USED DEVICES PRODUT DESCRIPTION Delivery scope Specifications INSTALLATION Remove the Transit Bolts Location Water Connection Power Connection STARTUP / OPERATION Prior to First Use Control Panel Table of Washing Cycles Start up the Washing Machine End of Washing TIPS FOR SAVING ENERGY MAINTENANCE AND CLEANING Cleaning and care Repairs 2 2 4 5 5 5 6 6 6 6 7 8 8 9 11 12 12 12 12 12 14 OVERVIEW Thank you for choosing this device.
Fire Danger / Short Circuit or Electric Leakage may occur - Do not install the appliance close to fire sources or heat sources. - Do not rest any burning candles or cigarettes on the appliance. - Do not install the appliances in places with high dampness or extreme wetness, lest igniting damages or other accident occur easily due to gathered water drops on electrical components. - Do not install the device in places under direct sunshine, lest the plastic components and rubber components become aged.
DISPOSAL OF USED DEVICES This product is marked in accordance with the European waste regulation 2002 / 96 / EC - WEEE It regulates the proper disposal of the product. Environmentally friendly disposal will prevent possible negative consequences to health caused by improper disposal. This symbol on the product or its packaging indicates that this product must not be disposed of with the regular household waste.
PRODUCT DESCRIPTION IMPORTANT: Unscrew the drain pump filter to let water run out when the machine is not used for a long time. NOTE: The drawings in the manual are only used for instruction. It may be vary from the model you buy.
INSTALLATION Remove the Transit Bolts Before using this washing machine, transport bolts must be removed from the backside of this machine. Loosen all bolts with spanner and then remove them and keep the transport bolts properly for future use/transport. Plug the holes with the transit bolts caps supplied. WARNING: Should the bolts aren’t removed, there could be serious damages during operation. Location - - The device must be installed in a clean place, where dirty does not build up.
It can drain the water up and down, the drain hose shall be installed at a height of min. 60 cm and max. 90 cm about the ground and its end shall not be immersed in water. Please use the supplied hose holder for flexible hoses to get a proper angle and secure it well to avoid a change in position. WARNING: Do not pinched the drain hose and do not place heavy objects on it:, an uncontrolled water flow can cause the machine to stop working.
- If power cord is damaged or has any sign of being broken, special power cord must be selected or purchased from its manufacturer or service for replacement. Protect the mains cable. Ensure that it does not turn into a trip hazard. The wall outlet must be freely accessible at all times. Do not overload the wall outlet; do not use an extension cable. Overloaded cables can cause fire and electric shock. Do not touch the plug with wet hands.
Detergent Drawer - Pull the drawer out. - Full fill the main wash detergent (we recommend concentrated detergent with less or no bubble formation) in the dispenser 1 market with . - Add the fabric softener into the compartment 2 market with . Do not exceed the maximum level mark. . - Full fill the detergent into the pre-wash dispenser 3 market with - Close the drawer.
4. Functions By pressing this button repeatedly you choose three basic and two combined functions. 'ECO', 'Anti-Crease', 'Rinse+', 'ECO + Anti-Crease' and ‘Anti-Crease + Rinse+’ ECO This function is to reduce energy and water consumption when washing a smaller load. The function is not available on all programs (see ‘Table of Washing Programs’). Anti-crease This function is to reduce the wrinkle of clothes during a wash cycle.
Table of Washing Cycles Below listed values are approximate values with standard conditions and therefore not binding. Program kg Time (min) 99/110/209/219/151 0/400/600/800/1000/1200 94/105/204/214/146 0/400/600/800/1000/1200 69/80/179/189/121 6 6 Cold/30/40/60/95 Available Functions AntiRinse+ creasing ECO 6 Cotton Inten- Cold/30/40/60/95 Cotton Pre-wash Spin speed (rpm) Standard cotton Cold/30/40/60/95 sive 0/400/600/800/1000/1200 Anti-Bac. 95 3.
The proper washing procedures shall be selected according to the types, quantities and dirtiness of the clothes to be washed in combination with the following washing temperature table. 90°C 60°C 40°C, 30°C, cold Seriously besmirched, pure white cotton or flax (for example: coffee, table cloths, canteen table cloths, towels, bed sheets).
Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use the wet cloth to wipe it off immediately. No sharp items are allowed to strike the cabinet. Please note: formic acid and its diluted solvents or equivalent are forbidden.
- Close the tap. If the water inlet hose is frozen, wrap the hose connection with a hot-towel. Remove the inlet hose and soak it in warm water. Full fill the drum with 2-3 l of warm water. Wait a few minutes, until the water has melted, then plug the cord in and select the program 'spin' and restart the machine. Make sure in future that the room temperature is above 0°C. Repairs CAUTION Servicing of electric devices must be conducted by qualified experts only.
