User Manual HOUSEHOLDWASHING MACHINE WA 5814 Please read this manual carefully and keep for future reference! 1 09/2013
TABLE OF CONTENT OVERVIEW IMPORTANT USE AND SAFETY INSTRUCTIONS DISPOSAL OF USED DEVICES PRODUT DESCRIPTION Delivery scope Specifications INSTALLATION Remove the Transit Bolts Place requirements Water Connection Power Connection STARTUP / OPERATION Prior to First Use Control Panel Table of Washing Cycles Start up the Washing Machine End of Washing TIPS FOR SAVING ENERGY MAINTENANCE AND CLEANING Cleaning and care Repairs 2 2 4 5 5 5 6 6 6 7 8 9 9 10 12 14 14 15 15 15 16 OVERVIEW Thank you for choosing this
Fire Danger / Short Circuit or Electric Leakage may occur - Do not install the appliance close to fire sources or heat sources. - Do not rest any burning candles or cigarettes on the appliance. - Do not install the appliances in places with high dampness or extreme wetness, lest igniting damages or other accident occur easily due to gathered water drops on electrical components. - Do not install the device in places under direct sunshine, lest the plastic components and rubber components become aged.
Unpacking Check the device for any possible transport damage. Do not install a damaged device. In case of damage, please contact your distributor. DISPOSAL OF USED DEVICES This product is marked in accordance with the European waste regulation 2002 / 96 / EC - WEEE It regulates the proper disposal of the product. Environmentally friendly disposal will prevent possible negative consequences to health caused by improper disposal.
PRODUCT DESCRIPTION IMPORTANT: Unscrew the drain pump filter to let water run out when the machine is not used for a long time. 1. 2. 3. 4. 5. 6. 7. Detergent Drawer Programme selector knob Temperature selection knob Control panel Door handle Filter pump Adjustable feet Delivery Scope Accessoires Name Qyt. Accessoires Name Qty.
INSTALLATION Remove the transport bolts Before using this washing machine, the transport bolts must be removed from the backside of the machine. Loosen all bolts with spanner and then remove them and keep the transport bolts properly for future use/transport. Plug the holes with the transit bolts caps supplied. WARNING: Should the bolts aren’t removed; there could be serious damages during operation.
Feet Adjustment (level adjustment) Take care to a firm and horizontal position of the washing machine. If the machine moves, adjusts the feet. Loosen the locknuts with a spanner. Adjust the feet: Using the spanner, turn it locknut in a clockwise direction. Then turn locknuts together with adjust feet to unscrew. Hold adjusts feet securely with a pipe wrench. Turn locknut again using the spanner until it sits firmly up against the housing. Use a spirit level to check the machine is standing level.
2. It can drain the water up and down, the drain hose shall be installed at a height of min. 60 cm and max. 90 cm about the ground and its end shall not be immersed in water. Please use the supplied hose holder for flexible hoses to get a proper angle and secure it well to avoid a change in position. WARNING: Do not pinch the drain hose and do not place heavy objects on it: an uncontrolled water flow can cause the machine to stop working.
STARTUP / OPERATION Prior to First Use - Make sure the power voltage at your place is same to the rating label at the device. Remove the accessories and any material from the drum. Clean the drum (see ‘Cleaning and Care’) Before using your washing machine for the first time let it run one washing cycle without laundry: - Connect the power and turn on the tap. Fill a little detergent into the drawer and close it. Turn on the washing machine by selecting the programme ‘Cotton Press the ‘Start/Pause’ button.
- NOTE: The dispenser is suitable for the use of washing powder in pre- and main- wash cycle! To avoid overflowing dissolve your washing powder in a bit of water in case it is clotted. Follow the manufacturer’s dosage information. Clothing, which are not suitable for the washing machines: - Ties, waistcoats, outerwear, etc. can shrink. - Colored clothes can discolor. - Pleated clothes, embossed or synthetic fibers can also shrink.
Note: ‘ ’ is for Standard Cotton programme. Standard Cotton at 60 °C and 40 °C are suitable to clean normally soiled cotton laundry and they are the most efficient programs in terms of combined energy and water consumptions for washing that type of cotton laundry; in addition, the actual water temperature may differ from the declared cycle temperature. NOTE: At the end of a wash cycle the knob must be turned to the position ‘Off’.
Delayed start To set the delayed start time the button is pressed repeatedly until the desired value shown on the digit display. The value can be chosen between 1 and 24 hours. Pressing the Start/Pause button the countdown starts on until the expiration of the time on the display. Safety child lock The appliance comes with a child lock function to avoid operating errors caused by playing children.
Spin cold - - 11 - Drain cold - - 4 - * Cotton Standard The programme intensive 60 °C and 40 ° C, used for the evaluation of the product performance, is the most efficient programme in terms of combined energy and water consumption for the washing of cotton laundries Water supply pressure Mpa WA 5814 - 60°C at full load: - 60°C at partial load: - 40°C at partial load: 0.05-0.8 0.05-0.8 0.05-0.8 Residual humidity % 54 53 53 Standby W On Off Time Min. 0.65 0.65 0.65 0.08 0.08 0.
40°C, 30°C, cold Normally besmirched articles (incl. Synthetic and wool). Select the washing program and temperature according to the fabrics and soiling degree. Generally applies: as higher the temperature setting, as higher the energy consumption. Capacity Do not overload the washing machine; otherwise the laundry will not get clean. The ’table of washing cycles‘ shows the capacities. Start up the Washing Machine - - - Connect the power. Check if water pipes are connected properly.
TIPS FOR ENERGY SAVING To save energy and to help protect the environment, we recommend that you follow these tips: - Do not select the high temperature program casually. - Washing at higher temperatures is no necessary when using modern detergents. - Select the washing program according to the type of laundry and the required degree of washing. - Clean the filters regularly to avoid excessive washing times and high electricity consumption. - Ventilate the room well.
- Clean the filter with a small brush. Install the water inlet hose firmly again, open the tap and make sure that no water drips from the hose. Cleaning the Drain Pump Filter, remove foreign bodies The foreign body trap in the drain pump prevents that rinsed parts blocks the drain pump system. Clean the trap periodically to ensure the normal operation of washing machine. Check the foreign body trap if the water in the wash cycle will not drain or increased noise can be heard during the pumping.
The machine takes and discharge water continuously. The door does not open. There is water on the floor. Press the Start/Pause button. The end of the drain hose is too low. Note that the minimum height is 60cm and maximum is 90cm. Ensure that the red led light turns off. Make sure that the machine is not in soak or rinse holds state. Push the door from the handle side and at the same time attempt to open. Make sure the inlet and drain hoses are intact and not leak.
TECHNICAL DATA Product fiche of household washing machines according to EU Directive 1061/2010: Brand Model Rated capacity Bomann WA 5814 8 kg Energy efficiency class 1) A+++ Consumption data 2) Weighted annual energy consumption Consumption data standard programme - cotton 60°C at full load - cotton 60°C at partial load - cotton 40°C at partial load Off mode power consumption Left-on mode power consumption 3) Weighted annual water consumption Spin drying efficiency class kWh 188.
09/2013
C. Bomann GmbH www.bomann.
