Operator`s manual

If adjustment is required:
Loosen the lock nuts of the longest tie
rod. Turn the tie rod manually until the
skis are properly aligned. Firmly retighten
the lock nuts.
The handlebar should also
be horizontal
when the skis are pointed toward the
front.
To adjust:
Loosen the
lock nuts
of the shortest tie
rod. Turn the tie rod manually until the
handlebar
is horizontal. Retighten the lock
nuts firmly.
•
WARNING: The ball joint socket
must run parallel with the steer-
ing arm. The socket must be restrained
when tightening the tie rod end lock
nuts.
(Typical)
A019006005
(Typical)
Restrain Tighten
Muffler Attachment
The engine/exhaust system parts are vital
toward efficient muffler function. Check
all attachments. Replace the springs and/
or tighten if necessary.
,., CAUTION: Do not operate vehicle
... with muffler disconnected other-
wise serious engine damage will occur.
Engine Head Nuts
With the ENGINE COLD, check that the
engine head nuts are
tight and equally
torqued to
21 N•m (15 lbf•ft).
Respect tightening sequence as follow:
A007002002
IMPORTANT: The engine head nut tor-
que should
be checked after the first 5
hours of operation.
Engine Mount Nuts
Check the engine mount nuts for tight-
ness. Retighten if necessary.
-------------------------31