Specifications

47
Other Indicator Lights
Located on right side of cluster. They
light up to monitor different functions.
If REVERSE and NEUTRAL lights flash
simultaneously, while setting the
transmission lever, it indicates the
selection is not completed yet. The
gears in the transmission are not prop-
erly aligned. Simply retry to move the
transmission lever. If it does not work,
try rocking the vehicle back and forth
to move the gears in the transmission
then retry.
If all lights flash continuously, it indicates
a damaged sensor (sub-transmission).
Although the vehicle can still be oper-
ated in this condition, downshifting
may increase engine “braking”. Drive
slowly. See an authorized Bombardier
ATV dealer as soon as possible.
1. Engine
2. High intensity
3. Reverse
4. Neutral
Engine
Dual function light. When continuously
on, it indicates a low oil pressure con-
dition of the engine. When flashing, it
indicates the engine is overheating.
This light turns on when the ignition
switch is turned on and remains on un-
til engine is running.
CAUTION: If the light does not turn
off right after engine starting, stop
engine. See an authorized Bombar-
dier ATV dealer. Do not use the vehi-
cle until repaired.
If engine overheats, refer to Engine
Overheat in SPECIAL PROCEDURES.
High Intensity
When the indicator light is ON, it indi-
cates the high intensity is selected on
the headlights.
Reverse
When lit, it indicates the transmission
is engaged in reverse.
Neutral
When lit, it indicates the transmission
is in neutral position.
10) Speedometer
Located in center of cluster. It indi-
cates the speed of the vehicle either in
km/h or MPH. The speedometer is
backlit every time the ignition switch is
turned on (either position).
1. Speedometer
2. Odometer/trip meter
3. Display selection button
V01I08Z
1234
V01I080
1
23
vmo2000_002b.fm Page 47 Friday, September 17, 1999 10:58 AM