Specifications

48
Odometer/Trip Meter
Combined LCD (Liquid Crystal Display)
display. Odometer records the total
distance traveled in either kilometers
or miles. The trip meter records the
distance traveled either in kilometers
or miles until it is reset. The last right
digit indicates the tenth of a kilometer
or a mile. It can be used to approxi-
mately monitor the fuel tank range or
distance between two locations for in-
stance.
Display Selection Button
The odometer always appears when
turning the ignition switch ON (either
position). To change the display to the
trip meter, momentarily press the but-
ton on the speedometer.
To reset the trip meter, push and HOLD
button until all numbers read zero
(while in trip meter selection).
Press once to switch from odometer
to tripmeter or vice versa. Press and
hold to reset while in trip meter selec-
tion.
11) Ignition Switch
Located at bottom of cluster.
Key-operated, 3-position switch: OFF,
ON with lights and ON without lights.
1. Ignition switch
Insert key in switch and turn to the de-
sired position. To remove key, turn key
to OFF then pull it out.
The ON with lights position, turns on
all lights with either the engine running
or not. The headlights automatically
dim to low intensity. Remember that
having the lights on without the engine
running discharges the battery. Al-
ways turn ignition to OFF after engine
has been stopped.
NOTE: While engine can be stopped
by turning ignition key OFF, we recom-
mend the engine be stopped by press-
ing the start/stop button.
Auto Shut-Down
If for some reason, the engine is not
started within 3 minutes approximate-
ly, the MPEM (Multi-Purpose Electron-
ic Module) will shut down to cut all
electrical system functions. Simply
turn the key to OFF then to ON to re-
gain normal use.
V01I09Y
V01I0AY
1
vmo2000_002b.fm Page 48 Friday, September 17, 1999 10:58 AM