Specifications

68
To be performed by an authorized Bombardier ATV dealer.
Required every 5 years only.
NOTE: Some riding conditions and hauling loads may result in requiring more
frequent maintenance. See a Bombardier ATV dealer. Some items are part of the
pre-operation checks and must always be performed prior to operating the vehi-
cle.
LUBRICATION AND MAINTENANCE CHART
INITIAL 10-HOUR INSPECTION EVERY 25 HOURS EVERY 50 HOURS EVERY 100 HOURS OR ONCE A YEAR EVERY 200 HOURS OR 2 YEARs TO BE PERFORMED BY
STEERING/
CONTROL
SYSTEMS
Handlebar fastener tightness
DEALER
Throttle condition
DEALER
Choke condition
DEALER
Steering system mechanism
DEALER
Tie rod ends
DEALER
Tire pressure
CUSTOMER
Wheel mount tightness and stud lubrication
CUSTOMER
Wear and condition of tires
CUSTOMER
Front wheel alignment and steering adjustment
DEALER
SUSPENSION
Swing arm condition
DEALER
Shock absorber condition
DEALER
BRAKE
Brake fluid level front/rear
CUSTOMER
Brake fluid replacement front/rear
DEALER
Brake cable condition
DEALER
Brake cable adjustment
DEALER
Brake pad condition
DEALER
Brake system condition (discs, hoses etc.)
DEALER
BODY/FRAME
Engine compartment
CUSTOMER
Skid plate condition
CUSTOMER
Frame condition
DEALER
Hitch/trailer ball condition (if installed)
CUSTOMER
Fastener condition/tightness
CUSTOMER
Seat latch
CUSTOMER
Front storage compartment cover latch condition
CUSTOMER
Vehicle cleaning and protection
CUSTOMER
vmo2000_002b.fm Page 68 Friday, September 17, 1999 10:58 AM