User manual

Update Firmware

We regularly improve the firmware of the BomeBox to add

new features or to improve existing functionality. Therefore,

we recommend to update to the latest firmware. The update

process will not change any settings and it will not remove any

uploaded project or other files.

To update, follow these steps:

1. Using an Internet browser, download the latest firmware

here (a .bxfw file):

https://www.bome.com/products/bomebox

2. Log into the Web Config

3. Go to the Settings page using the main menu

4. Go to the Backup & Firmware tab

5. In the Update BomeBox Firmware section, press the

Browse button and navigate to your Downloads folder. Se-

lect the downloaded .bxfw firmware file.

6. Back in the Web Config, press the Update… button

7. After a short while, you should see a verification page. You

can compare the MD5 checksum to the one displayed on

the download page.

8. Press the Proceed button.

9. Wait until the BomeBox restarted and the power LED stops

blinking. That first start after a firmware update takes ap-

proximately 2 minutes.

Now is a good time to register your BomeBox at the following

Internet URL:

https://www.bome.com/register

Registering will give you access to software, firmware updates

and notifications related to your BomeBox.