User manual

1. Connect the two BomeBoxes (A and B) or BomeBox A and

computer B via Ethernet or WiFi.

2. Make sure that A and B have different names.

3. In the Web Config of BomeBox A, go to the Network MIDI

page.

4. In the list of Network MIDI devices, find device B and click

on the Connect button next to its name.

5. If you're connecting to BomeBox B, approve the pairing by

pressing the blinking Pair button on BomeBox B.

Alternatively, you can also approve the pairing in

the Web Config of BomeBox B.

6. If you're connecting to a computer B, approve the

pairing on the pop-up window on computer B.

7. Pairings are maintained and remembered until manually

disconnected or canceled.

8. Note: the Bome Network tool can also be used to initiate a

pairing.

You can also connect to another BomeBox or computer by en-

tering the IP address directly. This advanced option is neces-

sary, if the device to connect to is not in the same subnet as

this BomeBox.

As of firmware version 1.3, a Network MIDI connec-

tion provides exactly one MIDI stream between the

two paired devices. Any routed MIDI ports are merged and

you can only MIDI channels mapping to separate streams

from different MIDI ports. A future firmware update will al-

low multiple MIDI streams over one pairing to access re-

mote MIDI ports directly. Until this feature is available,

please inquire in our support forum at

www.bome.com/support and we can assist with other alter-

natives to work around this limitation.