User manual

2. In the Project File Upload section at bottom, click the
Browse... button and select the project file you want to
add.
3. Click the Upload Project File... button.
4. Now that project file should appear in the list of projects.
5. Click the Select button in the list next to the name to acti-
vate and load this project.
Project MIDI Routes
Selecting a project file will reset all MIDI routes to the routes
stored in the project. If the project does not define MIDI
routes, all previous routes are removed. Closing the project
file will remove all MIDI routes and close all used MIDI ports.
Project MIDI Ports and MIDI Aliases
MIDI Aliases and ports used in the project are assigned by
name: if a MIDI port matches an existing port or alias on the
BomeBox, it is used directly. Otherwise, you can (and should)
assign that alias on the MIDI Ports page in the Web Config.
BomeBox Auto MIDI Aliases
In addition to any USB-MIDI devices plugged into the USB
port, the following MIDI ports and aliases are available on the
BomeBox:
BomeBox"DIN The physical MIDI DIN port (input and output)
Network"1 Auto-Alias for the first Network MIDI port
Network"2...
Auto-Alias for the second Network MIDI port
USB"1 Auto-Alias for the first USB-MIDI device
connected via USB
USB"2...
Auto-Alias for the second USB-MIDI device...
Network MIDI ports can also be accessed by name. A paired
connection to a BomeBox with name “My other BB” will auto-
create a MIDI port with name “My other BB”.
19