User manual

Initial Configuration

Web Config via WiFi

For configuring your BomeBox for the first time, the

easiest approach is to use WiFi to access the Web

Config:

1. Press the WiFi button to enable the BomeBox wireless LAN.

2. Once the WiFi LED is on, use a laptop, tablet, or smart

phone to connect: go to WiFi settings and select the

HotSpot “BomeBox” (SSID).

3. Then, if you are on a computer with Bome Network in-

stalled (see above), click on the green B icon and in the

menu, select Web Config BomeBox - Net.→

4. Otherwise, start a web browser like Safari, Chrome, or

Firefox, and enter 192.168.153.1 in the address bar to

connect to the Web Config (you can bookmark it).

5. Now you should see the login page of the Web Config in

the web browser. Proceed with the chapter Web Config

Password below.

Web Config via Ethernet

For configuring the BomeBox via a cabled

Ethernet connection, follow these steps:

1. On your computer, install and start the

Bome Network tool (as explained above).

2. Plug an Ethernet Cat-5 cable into either PoE Out or PoE In.

3. Plug the other end of the Ethernet cable in an unused port

of your Internet router. Make sure that your computer is

connected to the Internet router via Ethernet or via WiFi.

4. Or, if you don't have one, you can also try to plug the Eth-

ernet cable directly into your computer.