User manual

2. Select your country from the WiFi regulation drop-down
menu. This makes sure that the built-in WiFi follows your
country's regulation and, maximizing performance.
3. Change the Web Config password. We recommend to
change the Web Config password to prevent unauthorized
or even malicious access to your BomeBox. Make sure to
use a password which is not easy to guess, but which you
don't forget. This is the password required to administer
and change the settings of your BomeBox and is not the
same as the WiFi password discussed later.
4. If you're on a computer, click on the Password Reset File
button to download a small file which will allow you to re-
set the Web Config password if you ever forget it.
5. Click on the Save button at bottom.
6. Now you may need to log into the Web Config again – this
time with the new password. Also, if you've changed the
name and you're connected via WiFi, you'll need to re-con-
nect to the BomeBox' WiFi HotSpot, which now appears
under the new name.
WiFi Password
We also recommend to set the WiFi password using the follow-
ing steps:
1. In the Web Config, use the menu to go to the Settings
page.
2. Click on the tab WiFi.
3. In the HotSpot section, enter a password. It must have at
least 8 letters or numbers.
4. Click on the Save button at bottom.
5. If you're connected via WiFi, you'll need to re-connect to
the BomeBox' WiFi HotSpot with the new password.
If you ever forget the WiFi password, use the instructions for
Network Reset on page 28.
9