User's Manual
Table Of Contents
- 1 Welcome
- 2 Quick Start
- 3 MIDI Setup Guide
- 4 Program Interface
- 5 MIDI Translator Concepts
- 6 The Project
- 7 The Preset
- 8 The Translator Entry
- 9 Actions
- 9.1 MIDI
- 9.2 Keystrokes
- 9.3 Timer
- 9.4 Preset Change
- 9.5 Disable/Enable Processing Actions
- 9.6 Mouse (Outgoing)
- 9.7 Execute File (Outgoing)
- 9.8 Serial Port
- 9.9 AppleScript
- 10 Rules and Variables
- 11 Settings
- 12 Behind the Scenes
- 13 Tips & Tricks
- 14 Usage Example
- 15 MIDI Translator in Hardware: the BomeBox
- 16 Reference
Bome MIDI Translator: User's Manual 14 Usage Example
3. Next you'll need to make a link between the IN device and the OUT
device in the MIDI Router. Open the MIDI Router by clicking on
Settings / MIDI Router / Project Properties. Drag a link between Bome
MIDI Translator 1 Virtual IN and Bome MIDI Translator 1 Virtual OUT.
This will tell MIDI Translator to pass all data from Traktor thru to our
MIDI clock destination source Ableton Live.
4. The final step is to activate our MIDI clock control in our destination
application. In Live's preferences dialog window, select the MIDI Sync
category and turn Sync on for "Input: From Bome MIDI Translator 1"
to tell Live to receive MIDI clock from MIDI Translator.
(c) 2019 by Bome Software GmbH & Co. KG page 88