Use and Care Manual

ManualsBrandsBon-Aire ManualsTools & HardwareInflate and Go 12-Volt Inflator

873 E. Citation Court

Boise, Idaho 83716 USA

800-874-5771

www.bon-aireindustries.com

Operator’s Manual

12 Volt Inflator

Model: ICC12F, ICC12FC, ICC12FCN, ICC12FCM, ICC12N

• Safety Guidelines

• Assembly

• Operation

• Maintenance

• Troubleshooting

CAUTION:

Read the Safety Guidelines and All Instructions Carefully Before Operating

Summary of content (5 pages)

PAGE 1
Operator’s Manual 12 Volt Inflator Model: 873 E. Citation Court Boise, Idaho 83716 USA 800-874-5771 www.bon-aireindustries.
PAGE 2
TABLE OF CONTENTS General Safety Rules .........................................................1 Safety Symbols, Words and Labels....................................1 Specifications .....................................................................2 Important Safety Information ..............................................3 Parts Diagram.................................................................... 4 Operating Instructions ........................................................
PAGE 3
HIGH FLOW OPERATING INSTRUCTIONS SPECIFICATIONS Note: The attachments are not for use with automobile tires, bicycle tires, sports balls, or any other high pressure inflatables. CAUTION Note: Your High Flow Air Accelerator Kit is a great device for inflating or deflating air mattresses, small boats, inflatable toys and a host of other items that use a large volume of low pressure air.
PAGE 4
IMPORTANT SAFETY INFORMATION HIGH FLOW AIR ACCELERATOR KIT DIAGRAM WARNING Read and understand all instructions. Failure to follow instructions can result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Use 12 Volt DC only. Make sure that your vehicle 12 Volt power outlet is free of any ash residue or debris. A dirty 12 Volt power outlet can cause the inflator and power cord to overheat.
PAGE 5
OPERATING INSTRUCTIONS CAUTION PARTS DIAGRAM DO NOT OVER-INFLATE ITEM BEING INFLATED. To inflate vehicle and bicycle tires: 1. Place inflator evenly on the ground. 2. Open PVC coil air hose compartment and extend air hose. Open 12 Volt power cord compartment and extend power cord. 3. Connect the 12 Volt power cord into DC 12 Volt power outlet. 4. Connect the screw-on valve connector to tire air valve, twisting the rubber protector clockwise until it is securely attached to the tire air valve. 5.