Instructions / Assembly

Safely and easily twists wire ties. Tie rebar together and hold it in place, making consistent,

tight twists every time. Automatic recoil and reload function reduces repetitive action strain.

STEP 1:

Insert the hook of the tool into both loops

of the tie wire.

STEP 2

Pull straight back on the tool to twist the

wires tightly.

STEP 3:

If the wire needs further tightening, allow

the tool to recoil/reload, and pull again

to create more twists. Repeat as needed.

STEP 4:

After you are satisfied with your twisted

loop tie, remove the wire twister and

move on to you next loop tie.

IS22300 05/13

4430 Gibsonia Rd. • Gibsonia, PA 15044 • USA • www.bontool.com

#22-300/#82-185

Automatic Tie Wire Twister

INSTRUCTIONS

PAGE 1
#22-300/#82-185 Automatic Tie Wire Twister INSTRUCTIONS Safely and easily twists wire ties. Tie rebar together and hold it in place, making consistent, tight twists every time. Automatic recoil and reload function reduces repetitive action strain. STEP 1: Insert the hook of the tool into both loops of the tie wire. STEP 2: Pull straight back on the tool to twist the wires tightly. STEP 3: If the wire needs further tightening, allow the tool to recoil/reload, and pull again to create more twists.