Instructions / Assembly

The Canopy Tap is used along the top of a scaffold set-up to hold
weather protection material in place. It fits on top of any 5’ frame.
Brackets to hold 2’ x 4’ wood have been welded to the outside leg.
Weather protection clips can also be used.
NOTE:
Any time weather protection is used, additional scaffold tying is
required due to wind loads.
INSTRUCTIONS #14-885 Canopy Top for Scaffold End Frames
IS14885 5/15
4430 Gibsonia Rd. • Gibsonia, PA 15044 • USA • www.bontool.com