User Manual

BON ELECTRONICS
Video Quality
sets bit rate among 1/3/5/7/10/15Mbps. If you use low-grade USB memory, you should select
lower Mbps such as 3Mbps. For high quality recording, use a USB memory of which writing
speed is 40Mbps or higher. (* Its reading speed does not help)
Recording Timer
The timer can be set up to 6 hours. On recording, user may also change the timer by pressing
REC button.
Action on USB Full
The old files are automatically deleted when the USB memory is full, if this settings are on.
User may turn it off to secure recorded files when memory is full.
Thumbnail Seek Interval
sets the time interval of the still images when you review a footage.
Recording on Boot
sets to start recording automatically right after booting the unit.
USB Speed Test
This tests the USB speed to find an appropriate bit rate. It takes 1~2 minutes to complete.
Playing videos
Please be acknowledged that playing MP4, MOV files which are not recorded in the Mini-Rec is
not guaranteed.
Cutting recorded file
Mini-Rec provides a simple cutting feature to help its user. On the playback screen, press ‘DEL’
key to see the context menu, displaying ‘Set Start Position | Set End Position | Launch Cutting |
Cancel’. User can set start/end position to cut the video by the first two menu using the wheel
button. Finally, press ‘Launch Cutting’ and the video file will be cut.
* The last 1 second might not be shown when playback sometimes but the entire video will be
saved without problem
* The cutting feature is not for professional use, just to help rapid modification of video
Firmware Update
* In general, update firmware only when it is announced to do so on our web site
(www.bon-electronics.com) as it is a risky process.
To start updating, press LIST+SETUP+DEL. Insert USB memory that contains firmware and
restart the device.